Mã Báo Lỗi Máy In HP Designjet T120 24" (A1) ePrinter (CQ891A)

Mã Báo Lỗi Máy In HP Designjet T120 24" (A1) ePrinter (CQ891A)

Công Nghệ Siêu Việt - HP DesignJet 0913 232 009, hướng dẫn tự sửa chữa máy in HP T120 24 inch A1, liên kết điều khiển các video giới thiệu và nhiều hơn nữa.

Mã Báo Lỗi Máy In HP Designjet T120 24" (A1) ePrinter (CQ891A)

DesignJet T120 A1 24inch

An affordable, easy to use, web connected 24" printer with Wi-Fi connectivity

I. Quick Guide HP DesignJet T120 - Giới Thiệu Thông Tin Tổng Quan Máy In HP DesignJet T120 A1 24inch

- Product Code: CQ891A

- What's In The Box:

HP Designjet T120 ePrinter, printhead, spindle, introductory ink cartridges, quick reference guide, setup poster, startup software and power cord

- Actual Dimensions (w x d x h) & Weight:

987 x 530 x 285mm & 25.5kg

- Shipping Dimensions (w x d x h) & Weight:

1141 x 620 x 415mm & 30kg

- Printer Drivers:

Click here for drivers

- For more information or advice please contact us HP DesignJet Printers or call us on 0913 323 009

Danh Sách Mã Lỗi - Error Code

+ 41.1:10:

There may be a paper or carriage jam. Check and clear the paper path if necessary.
If error continues may Require a Service Engineer.

+(Colour) cartridge has expired:  Replace the cartridge.

+ (Colour) cartridge is low on ink: Ensure that you have a new cartridge of the same colour ready.

+ (Colour) cartridge is very low on ink: Ensure that you have a new cartridge of the same colour ready.

+ 01.1:10

Restart the printer.
If error continues may Require a Service Engineer.

+ 02:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 03.0:10

The battery of the real-time clock has expired. Require a Service Engineer.

+ 08:10

Restart the printer. If error continues may Require a Service Engineer.

+ 11:10

Restart the printer. If error continues may Require a Service Engineer.

+ 17:10

Restart the printer. If error continues may Require a Service Engineer.

+ 21.1:10

Restart the printer. If error continues may Require a Service Engineer.

+ 21:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 41:10 

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 42.1:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 42:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 45:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 51.1:10

Restart the printer. If error continues may Require a Service Engineer.

+ 55:10

? line sensor problem, Restart the printer. If error continues may Require a Service Engineer.

+ 79:04

Restart the printer. If error continues may Require a Service Engineer.

+ 85.1:10

Restart the printer. If error continues may Require a Service Engineer.

+ 85.2:10

Restart the printer. If error continues - Require a Service Engineer.

+ 87:10

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues - Require a Service Engineer.

+ Current job has been cancelled because roll is out of paper:
Current job has been cancelled because roll is out of paper
Load a new Roll of paper and send the job again.

+ Depleted cartridge must be replaced to resume printing.
Depleted cartridge must be replaced to resume printing.
Replace the cartridges as needed.

+ End of roll has been reached. ......
Full Error Message: End of roll has been reached. it is not possible to load the roll.
Load a new roll.

+ Ink system failure.
Ink system failure. 
Requires a Service Engineer.

+ Loaded paper is too wide. Manual unload required.

Loaded paper is too wide. Manual unload required.
Remove the paper manually and load paper of the correct size.

+ Maintenance 1 advised.

Requires a Service Engineer.

+ Maintenance 2 advised.

Requires a Service Engineer.

+ Maintenance 3 advised.

Requires a Service Engineer.

+ Missing or failed Printhead.

Remove or reinsert the same printhead. Install a new printhead. If problem persists , Requires a Service Engineer.

+ Multisheet tray is out of paper .......

Full Error Message: Multisheet tray is out of paper. Load paper in multi-sheet tray and press OK to continue printing or cancel the job.
Load paper into multi-sheet tray.

+ One or more cartridges appear to be missing or damaged.

One or more cartridges appear to be missing or damaged.
Insert cartridges of the correct colour as needed.

+ Out of memory.

The printer cannot complete the job. Resend the job, selecting Send Job as Bitmap in the driver, go to the Advanced tab, then Document options > Printer features.

+ Paper jam.

Paper Jam
Refer to User Manual "The Roll has Jammed" or "The Multi-sheet Tray has Jammed". If problem persists may Require a Service Engineer.

+ Paper too far from lateral load line.

Paper too far from lateral load line. 
Remove and reload the paper.

+ Paper width is smaller than min size supported

Full Error Message: Paper width is smaller than minimum size supported by the selected paper source. Load cancelled.
Remove paper and load paper of the correct size.

+ Please manually unload roll paper and try again.

Please manually unload roll paper and try again. 
Rewind the roll manually.

+ Refilled or depleted cartridge detected.

Check the cartridges.

+ Single sheet is loaded with too much skew.

Single sheet is loaded with too much skew.
Press Eject to unload paper - Remove and re-load the paper.

+ Used cartridge might not have enough ink .......

Full Error Message: Used cartridge might not have enough ink to complete startup. Open ink door to replace the cartridges.
If a new printhead has been inserted without a new set of ink cartridges. Replace the cartridges not marked as new.

+ Wrong file format.

The file format is incorrect or not supported. The printer cannot process the job which will be discarded.
Call service engineer if system error code recurs.

+ You are printing a multipage job .......

Full Error Message: You are printing a multipage job. Load another sheet to continue printing or cancel the job.
Load another single sheet.